Selwood Solids Handling Pumps

Selwood Solids Handling Range utilise the Seltorque pump-end by Selwood and is widely known as the trouble-free, efficient and environmentally friendly solution for pumping dirty water, sewage, polymer, bentonite and other fluids containing solids.

They range in size from 4″ (100mm) through to 12″ (300mm) outlets with flows up to 1100m3/hr and heads up to 32 metres. Models with even higher flow and head capacities are available as part of our High Head range.

The Selwood ‘S’ or Solids Handling range are available in many different builds including Open-Skid or Silenced Canopy configuration and mounted on Standard Skid, Pontoon, Trailer or Super Duty Mining Skid.

These pumps have a host of Features & Benefits, including:

• ‘Dry-Run’ ability due to the mechanical seal and bearings being housed in an oil filled chamber
• Solids Handling Capabilities of up to 100mm diameter
• Full-vortex design, for easy hanlding of solids and minimal blocking/ragging
• Handles running on-snore with ease
• Silenced Canopy models are fully bunded and lockable

Selprime Diaphragm-type Priming System

• Environmentally Friendly, does not expel any oil mist or emulsification
• Fast, Strong Priming from dry, with most models having 50cfm air handling and the Twin Prime models having 100cfm air handling
• Water Tolerant – the diaphragm type priming pump will handle some water carryover without damage, unlike alternative priming systems